OTC 6592 StrutTamer Extreme with Stand
This item OTC 6592 StrutTamer Extreme with Stand Avaliable best prices limited only The OTC 6592 StrutTamer Extreme with Stand had a good review from previous buyer so its recomended to you Extra long 3-bar handle gives user the leverage needed to compress heavier strut springs.Extreme duty design to handle the heavier springs found on mid- and some full-size truck strut assemblies.Open-ended design means you can take the strut in and out quickly and easily.Simply the most effective compressor for virtually any straight conical or offset spring.Reduction gearbox allows for a 2:1 torque compression increase when compressing struts. This is simply the most effective compressor for handling virtually any straight, conical, or offset spring. With its adjustable arms and four-point locking jaws, the StrutTamer Extreme securely holds the spring in place. To keep the strut assembly straight during compression, we’ve developed a center screw that floats from side to side. This way the strut and spring remain aligned – no matter what condition the spring is in. The StrutTamer Extreme also features an extra long 3-bar handle crank with the needed leverage to compress heavy-duty springs faster and easier. The StrutTamer Extreme can easily be mounted to the wall without the need for adapters, or you can choose the stand. The OTC StrutTamer Extreme stand features steel frame construction with two wheels that allow you to easily tilt the stand back and move the entire unit to the work area. The stand’s narrow design allows for easier mobility between vehicles in the shop. During compression, the wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place. Features extreme duty design to handle the heavier springs found on mid- and some full-size truck strut assemblies, new frame includes cross bracing at arm mount locations eliminates frame flex when compressing heavier springs, 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts, lock rings to hold arms in position eliminates arms from spreading or sliding when compressing offset or unique strut configurations, four-point locking jaws securely hold the spring in place, open-ended design means you can take the strut in and out quickly and easily, the arms adjust in and out, up and down, to accept many sizes of springs (2-1/2 inch to 10 inch diameter) (2-1/2 inch to 24 inch vertical stroke), no need to change shoes for different size springs. Comes with No. 6583 bridge accessory to be used on springs that cannot be compressed enough to remove the retaining nut.
OTC 6592 StrutTamer Extreme with Stand
Few user really like the OTC 6592 StrutTamer Extreme with Stand You can buy online this stuff with lowest price
OTC 6592 StrutTamer Extreme with Stand Feature
Extra long 3-bar handle gives user the leverage needed to compress heavier strut springs Extreme duty design to handle the heavier springs found on mid- and some full-size truck strut assemblies Open-ended design means you can take the strut in and out quickly and easily Simply the most effective compressor for virtually any straight conical or offset spring Reduction gearbox allows for a 2:1 torque compression increase when compressing struts
No comments:
Post a Comment